|
All Avaya / Lucent Fiber Patch Cords
How to Order Fiber Optic Cables
To facilitate the ordering process, please use the table below as a guide for specifying what your requirements are for each of the following:
- Fiber Construction
- Type of Fiber Used
- Jacket
- First Connector
- Second Connector
- Label or Shrink?
- Length
- Unit of Measure
|
FL
|
D
|
6
|
A
|
ST
|
|
|
|
010
|
F
|
|
Cordage Used
|
Fiber Used
|
Jacket
|
First Connector
|
Second Connector
|
(If Not Required, Omit)
|
(If Not Required, Omit)
|
Length
|
Unit of Measure
|
|
L=All Lucent
|
D = Duplex S = Simplex MS = Minicord Simplex MD = Minicord Duplex
|
6 = 62.5/125 Multimode S = Singlemode
|
A = PVC B = Plenum
|
LC = LC LCD = LC Duplex
LCU = LC Ultra SC = SC Ceramic
SCD = SC Ceramic Duplex SCU = SC Ultra
SCUD = SC Ultra Duplex ST = STII+
STU = STII+ Ultra
|
LC = LC LCD = LC Duplex
LCU = LC Ultra SC = SC Ceramic
SCD = SC Ceramic Duplex SCU = SC Ultra
SCUD = SC Ultra Duplex ST = STII+
STU = STII+ Ultra
|
L = Label S = Shrink
|
L = Label S = Shrink
|
001-999
|
F=Feet M=Meters
|
|
MCC'S FIBER ASSEMBLIES ARE LOSS GUARANTEED TO (-.5 dB) OR LESS PER MATED PAIR.
Fiber Optic Multimode Checklist:
1. SIMPLEX or DUPLEX 2. MODE (MULTIMODE 62.5/125, 50/125 or 100/140)? 3. CONNECTOR TYPE (SC, FDDI, ST ...etc.)?
4. CONNECTORS (Composite Polymer or Ceramic)?
5. JACKET (PVC or PLENUM)?
6. LENGTH (ALL LENGTHS IN FEET or METERS)?
Fiber Optic Singlemode Checklist:
1. SIMPLEX or DUPLEX 2. CONNECTORS (SC, FDDI, ST ...etc.)? 3. SINGLE MODE POLISH (STANDARD, APC, UPC or SPC)?
4. JACKET (PVC or PLENUM)? 5. LENGTH (ALL LENGTHS IN FEET or METERS)?
LC Fiber Patch Cords
Example Part Number: FLD6ALCDST-???
• The LC Solution is Bellcore, ANSI/EIA/TIA and IEC compliant and SYSTIMAXSCS approved. For 900 Micron and 1.6 MM fiber both Simplex and Duplex.
LC CHECK LIST:
1. MODE (MULTIMODE 62.5/125, SINGLE MODE)? 2. SECOND CONNECTOR TYPE (SC, ST, ...etc.)?
3. JACKET (PVC or PLENUM)? 4. LENGTH (ALL LENGTHS IN FEET or METERS)?
|